HS编码840991,其他点燃式活塞内燃发动机的零件从中国出口到芬兰,需要在芬兰缴纳的进口税费查询
| HS Code | 英文描述 | 关税信息 |
|---|---|---|
| 8409.91.0028 | Carburetor with :-2 mounting holes with a diameter of 31 mm,-a choke bore diameter of 18 mm or more, but not more than 19,05 mmfor use in the manufacture of a two-stroke engine grass trimmer | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0035 | Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with: -an operating pressure of not more than 22,5 MPa, -solenoid direct injector, -analog pressure sensor for not more than 22,5 MPa | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0038 | Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0040 | Fuel injector with solenoid valve for optimized atomization in the engine combustion chamber for spark-ignition internal combustion piston engines for use in the manufacture of motor vehicles of Chapter 87 | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD | ||
| 8409.91.0045 | Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of spark or compression ignition engines of motor vehicles | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0050 | Exhaust manifold with spiral-shaped gas turbine turbocharger component with: - a heat-resistance of not more than 1 050 degree C, and - a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD | ||
| 8409.91.0055 | Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0075 | Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: -an inlet diameter of 2 mm or more, but not more than 10 mm, -an outlet diameter of 2 mm or more, but not more than 10 mm, -an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, -a plastic covering moulded around a stainless steel tube | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0080 | Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating | 进口关税 NORMAL 2.7 % CIF |
| 8409.91.0090 | Other | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD |
税费概览：
【概览】
无论个人或商业实体在芬兰从事商品进口（从欧盟以外的国家进口），均须缴纳进口关税和其他税费。进口税费全部以货运价值，即到岸价格（CIF）计算。
【关税】
芬兰关税税率基本在0%（如书籍）和17%（如威灵顿长筒靴）之间。某些商品，如笔记本电脑、手机、数码相机和游戏机主机都免征关税。特定商品可能须征收附加税，根据原制造国来计征，如中国制造的自行车须征收额外48.5%的反倾销税。
【增值税】
芬兰标准增值税税率为24%；特定商品享受优惠增值税税率，如食品享受14%的优惠增值税税率，书籍和报纸享受10%的优惠增值税税率；某些商品免征关税，如笔记本电脑和其他电子产品。芬兰增值税=增值税税率×（CIF价+进口关税）。
【起征点】
芬兰进口税费设起征点，进口商品货值（FOB）不超过150美元或货运总关税不超过10欧元，免征关税；进口商品货值（FOB）不超过22美元或货运总关税不超过5欧元，免征增值税。
【其他】
消费税：针对特定商品如烟草制品征收的税费。 附加海关费：针对进口商品在海关过关时必须履行的检查、检验、检测而征收的费用。
|