HS编码850131,--输出功率不超过750瓦的直流电动机及直流发电机从中国出口到芬兰,需要在芬兰缴纳的进口税费查询
HS Code | 英文描述 | 关税信息 |
---|---|---|
8501.31.0010 | Motors of an output exceeding 735 W, DC generators, for use in civil aircraft (TN100) | 进口关税 NORMAL 0.0 |
增值税 VAT 24.0 % CIFD | ||
8501.31.0020 | for use in certain types of aircraft | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD | ||
8501.31.0045 | DC motors, brushless, with: - an external diameter of 90 mm or more, but not more than 110 mm, - a rated speed of not more than 3 680 rpm, - an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 degree C, - a supply voltage of 12 V, - a torque of not more than 5,67 Nm, - a rotor position sensor, - an electronic star-point relay, and - for use with an electric power steering control module | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD | ||
8501.31.0048 | Brushless DC electric motors: -with a rated power of 240 W or more, but not more than 260 W, -with a voltage of 36 V or higher, but not higher than 52 V -with a torque of 20 Nm or more, but not more than 140 Nm, -with a housing made of aluminum, aluminum alloy or plastic, -with or without a built-in controller, -with a communication function in the LIN or UART interface, -weighing 1,5 kg or more, but not more than 5,0 kg, -adapted for mounting in a bicycle frame for use in the manufacture of e-bikes | 进口关税 NORMAL 2.7 % CIF |
8501.31.0049 | Brushless DC electric motors: -with a rated power of 240 W or more, but not more than 260 W, -with voltage of 36 V or higher, but not higher than 52 V, -with torque of 30 Nm or more, but not more than 50 Nm, -with communication function UART or CAN interface, -with internal planetary gearbox with fixed or variable ratio, -made by CNC machined casting, -with housing made of aluminum, -weighing 2,3 kg or more, but not more than 4,4 kg,-adapted for mounting in the front or rear bicycle wheel | 进口关税 NORMAL 2.7 % CIF |
8501.31.0050 | DC motors, brushless, with: - an external diameter of 80 mm or more, but not more than 200 mm,- a supply voltage of 9 V or more, but not more than 16 V,- an output at 20 degree celcius of 300 W or more, but not more than 750 W,- a torque at 20 degree celcius of 2,00 Nm or more, but not more than 7,00 Nm,- a rated speed at 20 degree celcius of 600 rpm or more, but not more than 3 100 rpm,- with or without the rotor angle position sensor of resolver type or Hall effect type,of the kind used in power steering systems for cars | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD | ||
8501.31.0055 | DC motor with commutator, with - an external diameter of 27.5 mm or more, but not more than 45 mm, - a rated speed of 11 000 rpm or more, but not more than 23 200 rpm, - a rated supply voltage of 3.6 V or more, but not more than 230 V, - an output power of not more than 529 W, - a free load current of not more than 3.1 A, - a maximum efficiency of 54 % or more, for driving hand-held power tools | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD | ||
8501.31.0058 | Permanently excited DC motor with: -an external diameter of 30 mm or more but not more than 90 mm, including mounting flange, -a rated speed of not more than 15 000 rpm, -an output of 45 W or more but not more than 400 W, and -a supply voltage of 9 V or more but not more than 50 V, -whether or not a multiple-phase winding, -whether or not with a drive disc, -whether or not with a crankcase, -whether or not with a fan, -whether or not with a cap assembly, -whether or not with a sun gear, -whether or not with a speed and rotational direction encoder, -whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, -whether or not with a mounting flange | 进口关税 NORMAL 2.7 % CIF |
8501.31.0063 | Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with a minimum output of 750 W but not more than 1,55 kW (at 36 V), -a flange diameter of 85 mm or more but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley, -whether or not with roto | 进口关税 NORMAL 2.7 % CIF |
8501.31.0068 | Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:;-a length of 110 mm or more but not more than 140 mm,;-a width of 90 mm or more but not more than 130 mm,;-a height of 80 mm or more but not more than 110 mm;for use in the manufacture of engines of motor vehicles | 进口关税 NORMAL 2.7 % CIF |
8501.31.0085 | Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:- a DC motor of an output not exceeding 600 W,- for usage with a supply voltage of 8 V or more but no more than 48 V,- with motor connection (plug-in connection),- whether or not with position sensor,- whether or not with integrated control and power electronics,- whether or not with spring mechanism for resetting the lever,- built in a housing with reduction gear and lever attached to the motor drive shaft, or- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod | 进口关税 NORMAL 2.7 % CIF NORMAL 0.0 Non preferential tariff quota |
8501.31.0099 | Other | 进口关税 NORMAL 2.7 % CIF |
增值税 VAT 24.0 % CIFD |
税费概览:
【概览】
无论个人或商业实体在芬兰从事商品进口(从欧盟以外的国家进口),均须缴纳进口关税和其他税费。进口税费全部以货运价值,即到岸价格(CIF)计算。
【关税】
芬兰关税税率基本在0%(如书籍)和17%(如威灵顿长筒靴)之间。某些商品,如笔记本电脑、手机、数码相机和游戏机主机都免征关税。特定商品可能须征收附加税,根据原制造国来计征,如中国制造的自行车须征收额外48.5%的反倾销税。
【增值税】
芬兰标准增值税税率为24%;特定商品享受优惠增值税税率,如食品享受14%的优惠增值税税率,书籍和报纸享受10%的优惠增值税税率;某些商品免征关税,如笔记本电脑和其他电子产品。芬兰增值税=增值税税率×(CIF价+进口关税)。
【起征点】
芬兰进口税费设起征点,进口商品货值(FOB)不超过150美元或货运总关税不超过10欧元,免征关税;进口商品货值(FOB)不超过22美元或货运总关税不超过5欧元,免征增值税。
【其他】
消费税:针对特定商品如烟草制品征收的税费。 附加海关费:针对进口商品在海关过关时必须履行的检查、检验、检测而征收的费用。