HS编码840991,其他点燃式活塞内燃发动机的零件从中国出口到英国,需要在英国缴纳的进口税费查询
| HS Code | 英文描述 | 关税信息 |
|---|---|---|
| 8409.91.0025 | Air intake module for engine cylinders consisting of: -a suction pipe, -a pressure sensor, -an electric throttle, -hoses, -brackets, for use in the manufacture of engines of motor vehicles | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0028 | Carburetor with :-2 mounting holes with a diameter of 31 mm,-a choke bore diameter of 18 mm or more, but not more than 19.05 mmfor use in the manufacture of a two-stroke engine grass trimmer | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0033 | Camshaft carrier for a spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, with: | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0035 | Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:-an operating pressure of not more than 22,5 MPa,-solenoid direct injector,-analog pressure sensor for not more than 22,5 MPa | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0038 | Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, for use in the manufacture of motor vehicle engines | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0040 | Fuel injector with solenoid valve for optimized atomization in the engine combustion chamber for spark-ignition internal combustion piston engines for use in the manufacture of motor vehicles of Chapter 87 | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0045 | Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of spark or compression ignition engines of motor vehicles | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0050 | Exhaust manifold with spiral-shaped gas turbine turbocharger component with: - a heat-resistance of not more than 1 050 degree C, and - a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0053 | The exhaust gas recirculation assembly consisting of:-a control unit,-an air throttle,-an intake pipe,-an outlet hose,for use in the manufacture of spark-ignition or compression-ignition combustion engines of motor vehicles | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0055 | Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0070 | Inlet manifold, exclusively for use in the manufacture of the motor vehicles with: a width of 40 mm or more but not more than 70 mm, valves length of 250 mm or more but not more than 350 mm, air volume of 5,2 litres, and an electrical flow control system that provides maximum performance at more than 3200 rpm | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0075 | Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: -an inlet diameter of 2 mm or more, but not more than 10 mm, -an outlet diameter of 2 mm or more, but not more than 10 mm, -an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, -a plastic covering moulded around a stainless steel tube | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0080 | Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0085 | Cylinder head blank for a four cylinder engine with 10cores, made of aluminium alloy EN AC-45500, with:<br> <br>-no other components,<br> <br>-a hardness of 52HRB or more,<br> <br>-casting defects size of not more than 0,4mm and not more than 10defects per cm²,<br> <br>-a dendrite arm space in combustion chamber of not more than 25μm,<br> <br>-a double deck water jacket design and<br> <br>-a weight of 18kg or morebut not more than 19kg,<br> <br>-a length of 506mmor morebut not more than 510mm,<br> <br>-a height of 282mm or more but not more than 286mm,<br> <br>-a width of 143,7mm or morebut not more than 144,3mm,<br>in one single consignment of 1000pieces or more | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD | ||
| 8409.91.0090 | Other | 进口关税 NORMAL 2.0 % CIF |
增值税 VAT 20.0 % CIFD |
税费概览：
【概览】
无论个人或商业实体在英国从事商品进口（从欧盟以外的国家进口），均须缴纳进口税费。所有进口税费全部以货运价值，即到岸价格（CIF）计算。
【关税】
英国关税税率基本在0%（如书籍）和17%（如威灵顿长筒靴）之间。某些商品，如笔记本电脑、手机、数码相机和游戏机主机都免征关税。特定商品可能须征收附加税，根据原制造国来计征，如中国制造的自行车须征收额外48.5%的反倾销税。
【增值税】
英国标准增值税税率为20%，某些商品如儿童安全座椅享受5%的优惠增值税税率，某些商品如童装、童鞋免征增值税。增值税=增值税税率×（CIF价+进口关税）。
【起征点】
英国进口税费设起征点，进口商品货值（FOB）不超过135英镑或关税总额不超过9英镑，免征关税；进口商品货值（FOB）不超过15英镑，免征增值税。
【其他】
消费税：针对特定商品如烟草制品征收的税费。 附加海关费：针对进口商品在海关过关时必须履行的检查、检验、检测而征收的费用。
|