HS编码840991,其他点燃式活塞内燃发动机的零件从中国出口到瑞典,需要在瑞典缴纳的进口税费查询


HS Code 英文描述 关税信息
8409.91.0028Carburetor with :-2 mounting holes with a diameter of 31 mm,-a choke bore diameter of 18 mm or more, but not more than 19,05 mmfor use in the manufacture of a two-stroke engine grass trimmer
进口关税


8409.91.0035Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with: -an operating pressure of not more than 22,5 MPa, -solenoid direct injector, -analog pressure sensor for not more than 22,5 MPa
进口关税


8409.91.0038Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines
进口关税


8409.91.0040Fuel injector with solenoid valve for optimized atomization in the engine combustion chamber for spark-ignition internal combustion piston engines for use in the manufacture of motor vehicles of Chapter 87
进口关税


增值税

VAT  25.0 % CIFD   


8409.91.0045Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of spark or compression ignition engines of motor vehicles
进口关税


8409.91.0050Exhaust manifold with spiral-shaped gas turbine turbocharger component with: - a heat-resistance of not more than 1 050 degree C, and - a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm
进口关税


增值税

VAT  25.0 % CIFD   


8409.91.0055Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute
进口关税


8409.91.0075Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: -an inlet diameter of 2 mm or more, but not more than 10 mm, -an outlet diameter of 2 mm or more, but not more than 10 mm, -an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, -a plastic covering moulded around a stainless steel tube
进口关税


8409.91.0080Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating
进口关税


8409.91.0090Other
进口关税


增值税

VAT  25.0 % CIFD   


关税更新日期:2025-02-20 “部分数据”来源于商务部网站:   https://wmsw.mofcom.gov.cn/,美国来自于 hts.usitc.gov。

税费概览:

【概览】
无论个人或商业实体在瑞典从事商品进口(从欧盟以外的国家进口),均须缴纳进口税费。所有进口税费全部以货运价值,即到岸价格(CIF)计算。

【关税】
瑞典关税税率基本在0%(如书籍)和17%(如威灵顿长筒靴)之间。某些商品,如笔记本电脑、手机、数码相机和游戏机主机都免征关税。特定商品可能须征收附加税,根据原制造国来计征,如中国制造的自行车须征收额外48.5%的反倾销税。

【增值税】
瑞典标准增值税税率为25%,特定商品如书籍、报刊杂志享受6%的优惠增值税税率。增值税=增值税税率×(CIF价+进口关税)。

【起征点】
瑞典进口税费设起征点,进口商品货值(FOB)不超过1300瑞典克朗,免征关税,但增值税仍然征收。

【其他】
消费税:针对特定商品如烟草制品征收的税费。 附加海关费:针对进口商品在海关过关时必须履行的检查、检验、检测而征收的费用。"